Metrology and Standardization

foto

Improving developing country capacities in metrology, standardization, testing, quality assurance, accreditation and certification (MSTQ) lie at the core of developing country ability to export promotion.

Standardisation ”should focus more on innovation”

http://tinyurl.com/39gtas

EU standardisation policy should focus more on product innovation and competitiveness, the European commission argued in a new policy paper. Standards and technical harmonisation can help speed-up the uptake of environmental technologies and liberalise trade in rapidly-growing markets, it said. The commission’s policy paper outlines actions for a more market-led standardisation policy. Current standardisation models in Europe are ”called into question by challenges such as accelerated market cycles… and the trend towards global markets”, the paper says. Standardisation is key to developing a European sustainable industrial policy and removing barriers to technological advances in ”lead markets” such as renewable energy, recycling, bio-based products and sustainable construction, the commission says.


Swiss Federal Institute of Technology Zurich

http://www.smi.ethz.ch/

The chair focuses research and teaching in the fields of Strategic Management and Innovation. As an academic field, Strategic Management is concerned with the long-term competitiveness and performance of a corporation. It examines and explains why some corporations financially outperform its competitors.


The Centre for Knowledge, Innovation, Technology and Enterprise (KITE)

http://www.ncl.ac.uk/kite/

KITE brings together Newcastle University’s extensive research capabilities on innovation management and enterprise, incorporating research on the social, economic, managerial,

organisational, and cultural aspects of information and communications technologies and their social consequences, and studies of the role of universities in society.


The ISO Working Group on Social Responsibility: Developing the future ISO SR 26000 Standard

http://www.somo.nl/html/paginas/pdf/SOMOpaperISO2007EN.pdf

This briefing aims to inform NGOs and other civil society organizations about the ISO Working Group on Social Responsibility. This working group is currently developing an international standard that will give guidance to organizations on social responsibility: the ISO 26000 standard. The working group initiated its work in 2004 and is expected to deliver the guidance standard in the second half of 2009. The authors of this briefing argue that it is worthwhile for NGOs and other civil society organizations to start participating in the development of the standard. At this stage of the process, there are many possibilities to influence the drafting of the standard significantly.

Search past Newsletters:

 
Advanced

News and Events



International Metrology Related Cooperations


Bureau international des poids et mesures (BIPM)

http://www.bipm.org

The International Bureau of Weights and Measures is the English name of the BIPM, a standards organisation, one of the three organizations established to maintain the International System of Units (SI) under the terms of the Convention du Mètre (Metre Convention). Note that the abbreviation IBWM is not used. The task of the BIPM is to ensure world-wide uniformity of measurements and their traceability to the International System of Units (SI). It does this with the authority of the Convention du Mètre, a diplomatic treaty between fifty-one nations (as of 2005), and it operates through a series of Consultative Committees, whose members are the national metrology laboratories of the Member States of the Convention, and through its own laboratory work. The BIPM carries out measurement-related research. It takes part in, and organises, international comparisons of national measurement standards, and it carries out calibrations for Member States. The other organisations which maintain the SI system are: the Conférence générale des poids et mesures and the Comité international des poids et mesures.


International Organization of Legal Metrology (OIML)

http://www.oiml.org

The International Organization of Legal Metrology (OIML) is an intergovernmental treaty organization whose membership includes Member States, countries which participate actively in technical activities, and Corresponding Members, countries which join the OIML as observers. It was established in 1955 (see the Convention) in order to promote the global harmonization of legal metrology procedures.


Institute for Reference Materials and Measurements (IRMM)

http://www.irmm.jrc.be

The Institute for Reference Materials and Measurements or IRMM, located in Geel, Belgium, is one of the seven institutes of the Joint Research Centre (JRC), a Directorate-General of the European Commission (EC). The IRMM promotes a common and reliable European measurement system in support of European Union policies. The institute works on the production and dissemination of quality assurance tools, such as validated methods, reference materials, reference measurements, interlaboratory comparisons and training.


CEN, the European Committee for Standardization

http://www.cenorm.be

Founded in 1961 by the national standards bodies in the European Economic Community and EFTA countries, CEN is contributing to the objectives of the European Union and European Economic Area with voluntary technical standards which promote free trade, the safety of workers and consumers, interoperability of networks, environmental protection, exploitation of research and development programmes, and public procurement.


The International Accreditation Forum, Inc. (IAF)

http://www.iaf.nu

World association of Conformity Assessment Accreditation Bodies in the fields of management systems, products, services, personnel and other similar programmes of conformity assessment.


International Organisation of Standards Users (IFAN)

http://www.ifan.org

IFAN ims to eliminate technical barriers to trade by use of international standards, is currently working on a user’s guideline for standardisation organisations.


EA Accredited Bodies

http://european-accreditation.org/content/database/default.htm

European Accreditation (EA) is developing a European database containing information about laboratories and bodies accredited by the EA members. The database is operational from June 15, 2004 and provides online information about calibration laboratories accredited by the Danish (DANAK), Finnish (FINAS), French (COFRAC), German (DAR-DKD) and English (UKAS) accreditation bodies.


Further Weblinks:

International Electrotechnical Commission (IEC), http://www.iec.ch

International Telecommunication Union (ITU), http://www.itu.int

International Laboratory Accreditation Cooperation (ILAC), http://www.ilac.org

International Measurement Confederation (IMEKO), http://www.imeko.org

European Cooperation for Legal Metrology (WELMEC), http://www.welmec.org

Arab Industrial Development and Mining Organization (AIDMO), http://www.arifonet.org.ma



Regional Metrology Organisations (RMO’s)

The metrological world is represented by several regional metrology groupings, who have similar aims and objectives:

EUROMET: European Metrology http://www.euromet.org

APMP (Asia Pacific Metrology Programme), http://www.apmpweb.org

COOMET (Cooperation in Metrology among the Central European countries), http://www.coomet.org

SADCMET (Southern African Development Community Cooperation in Measurement Traceability), http://www.sadcmet.org

SIM (Sistema Interamericano de Metrologia), including NORAMET (North American Metrology Cooperation), http://www.sim-metrologia.org.br



National Metrology Institutes

Argentina: Instituto Argentino de Normalización y Certificación, http://www.iram.com.ar

Australia: Division of Telecommunication & Industrial Physics (CSIRO), http://www.csiro.au

Brazil: Instituto Nacional de Metrologia, Normalização e Qualidade Industrial (INMETRO), http://www.inmetro.gov.br

Canada: Institute for National Measurement Standards (INMS), http://inms-ienm.nrc-cnrc.gc.ca

China, China National Institute of Standardization (CNIS), http://www.sac.gov.cn

Germany: Physikalisch-Technische Bundesanstalt (PTB), http://www.ptb.de

India: Standardisation, Testing and Quality Certification (STQC) Directorate, http://stqc.nic.in

Institute for Standards, Metrology and Intellectual Property of Bosnia and Herzegovina (BASMP), http://www.basmp.gov.ba

Italy: Istituto Elettrotecnico Nazionale Galileo Ferraris (IEN), http://www.ien.it

Japan: National Institute of Advanced Industrial Science and Technology AIST, http://www.aist.go.jp

Netherlands: Nederlands Meetinstituut (NMi), http://www.nmi.nl

Russia: Federal Agency on Technical Regulating and Metrology (GOST R), http://www.gost.ru

Serbia and Montenegro: Institution for Standardization of Serbia and Montenegro (ISSM), http://www.jus.org.yu

South Africa: National Metrology Laboratory (NML), http://www.csir.co.za

Switzerland: Bundesamt für Metrologie und Akkreditierung, http://www.metas.ch

Tunisia: National Institute for Standardization and Industrial Property (INNORPI), http://www.inorpi.ind.tn

Ukraine: State Committee of Ukraine on Technical Regulation and Consumer Policy (DSSU), http://www.dssu.gov.ua

United Kingdom: National Physical Laboratory (NP), http://www.npl.co.uk

USA: National Institute of Standards and Technology (NIST), http://www.nist.gov
more …


Standardizing Organizations and User Associations

AFNOR Association Française de Normalisation, http://www.afnor.org

African Organization for Standardization, http://www.arso-oran.org

Association française pour la connaissance et l’application des normes (ACANOR), http://www.acanor.org

British Standards Society (BSS), http://www.bsi-global.com/bss

CEOC (European Confederation of Organisations for Testing, Inspection, Certification and Prevention) – a voluntary group of organisations for testing, technical inspection, certification of products and Quality Management Systems and risk prevention. http://www.ceoc.com

China Association for Standardization (CAS), http://www.china-cas.org

Deutsches Institut fur Normung (DIN), http://www.din.de

ANP German Committee of Standards Users, http://www.anp.din.de

EA (European cooperation for Accreditation) for mutual recognition of certificates for calibration and test services. http://www.european-accreditation.org

Eurachem – a network of organisations in Europe having the objective of establishing a system for the international traceability of chemical measurements and the promotion of good quality practices, http://www.eurachem.ul.pt

EUROLAB – the European Federation of National Associations of Measurement, Testing and Analytical Laboratories http://www.eurolab.org

International Commission on Illumination (CIE), http://www.cie.co.at/cie/

International Electrotechnical Commission (IEC), http://www.iec.ch/

International Laboratory Accreditation Cooperation, ILAC is an international cooperation of laboratory and inspection accreditation bodies, http://www.ilac.org

International Measurement Confederation (IMEKO), http://www.imeko.org

International Standards Organisation (ISO), http://www.iso.ch

International Telecommunications Union (ITU), http://www.itu.ch

IQNet Association International Certification Network, IQNet is an Association composed of 38 certification/registration bodies, with legal seat in Bern/Switzerland. http://www.iqnet-certification.com

Japanese Standards Association (JSA ), http://www.jsa.or.jp

Pan American Standards Commission (COPANT), http://www.copant.org

Standards Engineering Society (SES), http://www.ses-standards.org

NORMAPME European Office of Craft/Trades and Small and Medium-sized Enterprises for Standardisation, is the unique European organisation focused on small enterprise interests in the European standardisation system. Its members represent over 11 million enterprises in all European countries, including all EU and EFTA member states. http://www.normapme.com



Technical Cooperation

INTRACEN’s Standards and Quality Management programme

http://www.intracen.org/eqm/

The Standards and Quality Management programme aims to support enterprises to meet standards, technical regulations and sanitary and phytosanitary measures in their export markets; to strengthen the capacities of organizations dealing with Standardization, Quality Assurance, Accreditation and Metrology (SQAM) to provide services to enterprises. The Standards and Quality Management Programme addresses the quality related needs of exporters in developing countries and economies in transition and concentrates on i

nstitutional and capacity development in the export quality management field.


Standards and Trade Development Facility

http://www.standardsfacility.org

The Standards and Trade Development Facility (STDF) is a global programme in capacity building and technical assistance to assist developing countries in trade and SPS measures established by the Food and Agriculture Organization (FAO), the World Organization for Animal Health (OIE), the World Bank, the World Health Organization (WHO) and the World Trade Organization (WTO).


PTB and development cooperation

http://www.ptb.de/en/wegweiser/welt/zusammenarbeit.html

The National Metrology Institute of Germany (PTB) implements technical cooperation projects on behalf of the BMZ in fields including mensuration, standardisation, testing, and quality assurance. Projects aim to help set up and consolidate quality assurance infrastructures in threshold and developing countries. The international activities of the PTB in the area of Technical Cooperation all have the same objective: to assist the developing and threshold countries in setting up a sound MSTQ system. This acronym stands for measurement, standardization, testing and quality assurance, the four columns of metrology. They are so to say the solid foundation on which an industrialized state rests – from the metrological point of view. And most project partners of the PTB are states which are already on their way to industrialization.


The NMS International Metrology Programme

http://www.npl.co.uk/international_office/

This Programme is funded by the UK National Measurement System (NMS), The International Metrology Programme was launched in April 2001 and is now in it’s second three year programme, running from April 2004 to March 2007. The aim of the International Programme is to ensure fair and safe international competition, to unlock the nation’s innovative potential through an optimal metrology infrastructure, to effectively represent the national interest at the international table and to play a leading role in initiatives affecting the economic and social well being of the nation. The International Office at the UK National Physical Laboratory has been established in response to the growing internationalisation of metrology. Its key role is to ensure that the UK has a coherent and strategic approach to International issues and to provide a gateway to overseas organisations, in particular National Metrology Institutes (NMIs).


Swiss programme of technical cooperation in the field of standards and technical regulations

http://www.seco-cooperation.ch/entwicklungsarbeit/00601/index.html?lang=de&PHPSESSID=

This SECO prgramme aims at supporting developing countries and transition economies in effectively benefiting from market access opportunities in the world trading system by assisting them in meeting the requirements of international markets.


DTI Knowledge Transfer Programme

http://www.ktprogramme.org.uk

The National Measurement System (NMS) provides world-class measurement standards and calibration facilities. A DTI-funded programme promoting services available to industry from the UK’s National Measurement System.

Training

National Weights & Measures Laboratory (UK), http://www.nwml.gov.uk

Nederlands Meetinstituut NMi (Netherlands), http://www.nmi.nl

Deutsche Akademie für Metrologie DAM (Germany), http://www.dam-germany.de

Laboratoire national de métrologie et d’essais (France), http://www.lne.fr

Compliance online Training

http://www.complianceonline.com/ecommerce/control/trainingHome



Publications

Quality infrastructure:

a contribution to the promotion of the economic development in Technical Cooperation

http://www.ptb.de/de/org/q/q5/Quality%20Infrastructure%20english.pdf

This 12-page brochure describes the correlations between quality infrastructure and promotion of the economic development in a concrete way. It reflects the work of PTB’s TC from the point of view of the current discussion on development politics, gives a clear orientation and illustrates its potential. Great importance is attached to the interaction with the international institutional MSTQ landscape, and the linkage with the WTO agreements is shown. It is pointed up that a complete and internationally recognized network for quality infrastructure is not only indispensable, but also universally applicable.


Metrology – in short, 2nd Edition, April 2004

http://www.euromet.org

Quality Infrastructure, Conformity Assessment – Metrology, Standardization, Testing, Quality Management (MSTQ)

http://www.bmz.de/en/service/infothek/fach/konzepte/konzept130.pdf

German BMZ Concepts No. 130


Benefit of Legal Metrology for the Economy and Society

http://www.oiml.int/publications/E/birch/E002-e03.pdf

A study by John Birch A.M. for the International Committee of Legal Metrology


An Introduction to Standards and Standardization

http://www.standardization.divx.to

by Wilfried Hesser, Alex Inklaar

EUROMET’s policy on the Application of Quality System in National Metrology Institutes

http://www.euromet.org/docs/guides/docs/E-G01-v02_1.pdf


EUROMET and its International Relations

http://www.euromet.org/docs/guides/docs/E-G02-v01_1.pdf


Establishment of National Capability Providing Instrumentation Support Services: Case Study

http://www.unido.org/file-storage/download/?file_id=55879

UNIDO Trade Capacity Building, Industrial Promotion and Technology Branch, UNIDO Working Paper Series 04/05


Guidelines for the establishment of simplified metrology regulations

http://www.oiml.org/publications/G/G015-e92.pdf

Elements for a Law on Metrology

http://www.oiml.org/publications/D/D001-e04.pdf


DTI – Innovation Report

http://www.dti.gov.uk/files/file12093.pdf

Competing in the Global Economy: the Innovation Challenge


International vocabulary of terms in legal metrology (VIML) (bilingual French-English) / Vocabulaire international des termes de métrologie légale (VIML) (bilingue français-anglais) http://www.oiml.org/publications/V/V001-ef00.pdf


Certification of Organic Foodstuffs in Developing Countries

http://www2.gtz.de/dokumente/bib/02-5121.pdf

A GTZ publication


Do standards matter for export success?, Tsune Otsuki, Maggie Xiaoyang Chen, John S. Wilson, World Bank Policy Research Working Paper 3809.

http://www-wds.worldbank.org

In this paper the authors examine how meeting foreign standards affects firms’ export performance, reflected in export propensity and market diversification. The analysis draws on the World Bank Technical Barriers to Trade Survey database of 619 firms in 17 developing countries. The results indicate that technical regulations in industrial countries adversely affect firms’ propensity to export in developing countries.


The cost of compliance with product standards for firms in developing countries: an econometric study,

http://econ.worldbank.org

This World Bank Policy Research Working Paper uses econometric models to provide the first estimates of the incremental production costs for firms in developing nations in conforming to standards imposed by major importing countries. They use firm-level data generated from 16 developing countries in the World Bank Technical Barriers to Trade (TBT) Survey Database. Their findings indicate that standards do increase short-run production costs by requiring additional inputs of labor and capital.


Standards and Global Trade: A Voice for Africa

http://www.unido.org/file-storage/download/?file_id=12960

The World Bank 2003


Values and Rules of Global Trade

http://www.ptb.de/de/org/q/q5/docs/gg_eng.pdf

Quality Infrastructure: a Step towards Good Governance


The Role of International and National Agencies in Trade-Capacity Building

http://www.unido.org

by Susan Prowse, UNIDO


ISO Publications http://www.iso.org/iso/en/CatalogueListPage.CatalogueList

ISO Store http://www.iso.org/iso/en/prods-services/ISOstore/store.html

Catalog of OIML Publications: http://www.oiml.org/publications


NORMAPME Newsletter

http://www.normapme.com/english/Newsletter.htm

Subscriptions: Birte M. Day, Press and Communications officer, Ph: +32 2 2820 539, info@normapme.com

PTB’s Candela

http://www.ptb.de/lists/

Information sheet published at regular intervals with communications and news from PTB’s Technical Cooperation.


ISO Management Systems e-newsletter

http://www.iso.org/iso/en/iso9000-14000/ims/IMSAlert_form.html

Alerts to new ISO press releases and new ISO Web site items on ISO 9000, ISO 14000, social responsibility.


Related Websites and Databases

WSSN World Standards Services Network

http://www.wssn.net/WSSN/index.html

World Standards Services Network (WSSN), is a network of publicly accessible World Wide Web servers of standards organizations around the world. Through the Web sites of its members, WSSN provides information on international, regional and national standardization and related activities and services.


ISO/IEC Information Centre ( ISOIEC )

http://www.standardsinfo.net

Provides stakeholders with information about standardization, standards and related matters. This site of the ISO/IEC Information Centre serves as a portal to the main information given on various pages of the ISO and IEC Web sites e.g. the ISO and IEC Catalogues, provides an enquiry service for users and gives access to the Web sites of national standards organizations via WSSN.


Virtual Institute for Reference Materials (VIRM)

http://www.virm.net

Find a Reference Material by using the extensive searchable data base on RMs, find RM specialists, use the scientific HelpDesk, get the bimonthly VIRM Newsletter by e-mail, locate a publication/report in the Library (many are downloadable in pdf format), look for Conferences or training Workshops, RM related Projects, or Links. RM Producers and RM Users are invited to enter information on the site.


Valid Analytical Measurement

http://www.vam.org.uk/referencematerials/reference.asp

Visit the VAM website for free advice and information on reference materials and other measurement issues


The BIPM key comparison database

http://kcdb.bipm.org

The BIPM key comparison database is defined in the text of the MRA as the database maintained by the BIPM (Bureau International des Poids et Mesures) which contains Appendices A, B, C and D of the Mutual Recognition Arrangement.


ISONET – the ISO Information Network

http://www.wssn.net/WSSN/RefDocs/isonetdir/index.html

ISONET is an agreement between standardizing bodies to combine their efforts in order to make information on standards, technical regulations and related matters readily available whenever it is required.


The Standards Portal

http://www.standardsportal.org

The Standards Portal is an online resource designed to provide information and educational materials on standardization—including conformity assessment and mandatory technical regulations. The aim of the Standards Portal is to facilitate trade between the United States of America and the People’s Republic of China.


International Information Centre for Terminology (Infoterm)

http://www.infoterm.info

With increasing specialization in business as well as in science and technology, specialized knowledge keeps growing, and with it the number of technical terms. With the right terminology, we can communicate in the ”right” way and understand each other correctly.


IQNet database on certified/registered companies

http://www.iqnet-certification.com/indexsearch.php

IQNet and its partners established a common database on certified/registered companies. All certificates/registrations contained in this database are issued by IQNet partners. Certificates/registrations mean mainly third-party certification/registration of management systems in accordance with international standards such as ISO 9001, ISO 14001, sector specific standards, or national standards.

Compliance online

http://www.complianceonline.com

An information portal for compliance, standards and quality. A place users can visit to access the latest thinking, the most innovative ideas, the best practices and the largest repository of products in quality and compliance.


NIST Virtual Library

http://nvl.nist.gov/index.cfm

Information resources that support NIST staff research needs. Browse the Library’s Online Catalog and list of E-Journals; search science and engineering Databases; gather information on Patents and Standards, or use reference tools such as dictionaries and thesauri.


Information Portal of the Physikalisch-Technische Bundesanstalt

http://www.mstq.info/

German only.

Technical Barriers to Trade database

http://mit.tut.fi/dictionary/

by Tampere University of Technology, Finland


The Science and Development Network (SciDev.Net)

http://www.scidev.net

SciDev aims to provide reliable and authoritative information about science and technology for the developing world.


Nanotechnology for Development

http://topics.developmentgateway.org/nanotechnology

Development Gateway Portal


The WWW Virtual Library for Technology Assessment

http://www.oeaw.ac.at/ita/www.htm

The VL for Technology Assessment consists of links to resources on the use of new technologies within their societal context. Technology Assessment provides the basis for developing technological and organisational design alternatives and any required regulatory measures.


Physics Departments Worldwide

http://physnet.uni-oldenburg.de/PhysNet/physdep.html

PhysDep – Physics Departments Worldwide – offers lists of links to worldwide distributed physics institutions, such as institutes and departments at universities, ordered by continent, country and town.


Online Conversion Sites

http://www.convert-me.com/en/

http://www.onlineconversion.com

http://www.weitzenegger.de/en/to/converter.html

http://www.weitzenegger.de/en/to/conversion.html

http://www.megaconverter.com/mega2/

http://www.digitaldutch.com/unitconverter/



Related Linklists

BIPM Link Database

http://www.bipm.org/en/practical_info/useful_links/


WSSN links to International Standardizing Bodies

http://www.wssn.net/WSSN/listings/links_international.html


Alphabetical list of Web sites in WSSN

http://www.wssn.net/WSSN/listings/links_alphabet.html


EUROMET Member list

http://www.euromet.org/home/member/


European Accreditation Links

http://www.european-accreditation.org/content/links/links.mpi


Alphabetical list of ILAC members and contact details

http://www.ilac.org/members_contact_details.html


Links relevant to Valid Analytical Measurement

http://www.vam.org.uk/links/links.asp


VIRM database for a Glossary

http://www.virm.net/glossary.html?&cid=40

TÜV Rheinland Links

http://www.int-app.tuv.com/German/Tools/link.htm


INMS Links to other National Metrology Institutes

http://inms-ienm.nrc-cnrc.gc.ca/links_e.html


APMP’s Useful Links for Developing Economies

http://www.apmpweb.org/dec/dec_links.html